New Crowdin updates

docs/CROWDIN/cs/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/de/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. Nach der zweiten oder dritten Wiederholung erhälst Du die Möglichkeit, den Pod zu entfernen.
 4. Sobald der alte Pod gelöscht ist, kannst Du einen neuen Pod aktivieren.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/el/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/es/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/fr/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/he/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/ko/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/lt/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/nl/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/pb/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/pl/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/pt/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/ro/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/ru/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/sk/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/tr/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/zh_CN/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. 经过两到三次重试后，系统将提供移除储药器的选项。
 4. 待旧储药器移除后，即可激活新储药器。
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/zh_CN/Getting-Started/CompatiblePumps.md

@@ -9,12 +9,12 @@ AAPS可与多种胰岛素泵配合使用。  以下列表显示了当前支持
 - [Dana-i](../CompatiblePumps/DanaRS-Insulin-Pump.md) (蓝牙)
 - [Diaconn G8 ](../CompatiblePumps/DiaconnG8.md)  (蓝牙)
 - [EOPatch2](../CompatiblePumps/EOPatch2.md) (蓝牙)
-- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md)  ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
+- [Omnipod Eros](../CompatiblePumps/OmnipodEros.md)  (需要[额外的通信设备](#CompatiblePumps-additional-communication-device))
 - [Omnipod DASH](../CompatiblePumps/OmnipodDASH.md)  (蓝牙)
 - [Medtrum Nano](../CompatiblePumps/MedtrumNano.md)  (蓝牙)
 - [Medtrum 300U](../CompatiblePumps/MedtrumNano.md)  (蓝牙)
 - [Equil 5.3](../CompatiblePumps/Equil5.3.md) (蓝牙)
-- Certain older [Medtronic](../CompatiblePumps/MedtronicPump.md) ([additional communication device](#CompatiblePumps-additional-communication-device) needed)
+- 某些较旧的[美敦力](../CompatiblePumps/MedtronicPump.md)设备（需要[额外的通信设备](#CompatiblePumps-additional-communication-device)）
 
 ## 我的胰岛素泵未列出。