- Copy EFI folder from release zip to your EFI volume
- Reboot, reset NVRam & Enjoy
- After installation I recommend Mapping your USB ports following these instructions: USB Mapping.
You also need to remove from EFI the files /EFI/OC/ACPI/SSDT-UIAC.aml, /EFI/OC/Kexts/USBInjectAll.kext and update the config.plist again after adding your own USB port mapping.
| Device | Name | Working |
|---|---|---|
| Processor | Intel® Core™ i5 7300HQ Processor | YES |
| Chipset | Intel® C230 Chipset | YES |
| Memory | DDR4 16GB 2400 MHz | YES |
| Graphic | Intel® HD 630 1.5Gb | YES |
| Graphic | Nvidia GeForce GTX 1050Ti 4Gb | UNSUPPORTED |
| Audio | ALC233(235) | YES |
| Storage | SSD SATA3, PCIE Gen3X4 SSD, Hard Drives | YES |
| Keyboard | ASUS onboard | YES |
| Card Reader | RTS5229 PCI Express | Unkown |
| WebCam | ASUS onboard HD UVC | YES |
| Networking | Realtek RTL8168H/8111H PCI Express Gigabit Ethernet | YES |
| WiFi | Intel® AX200 | YES |
| Bluetooth | Intel® AX200 | YES |
| Battery | 4 Cells Battery 3350mAh | YES |
| USB | USB 3.0 Bus | Testing |
| HDMI | Intel® HDMI HD 630 | YES |
| Touchpad | ELAN 1200 | YES |
| Hibernation | Sleep mode | YES |