pages/learn: Update Jetson Orin docs

... to clarify that dtbs can be PR-ed for multiple Jetson Orin devices
    
Change-type: patch
Signed-off-by: Alexandru Costache <[email protected]>

Author: acostach

pages/learn/develop/hardware/i2c-and-spi.md

@@ -302,7 +302,7 @@ Loading of custom device trees is not supported for the Jetson Xavier family of
 To test a custom device tree on a Jetson Nano, TX2 or Jetson AGX Orin or Orin NX device, place your custom compiled device tree in the host operating system of your device, in the following path: `/mnt/sysroot/active/current/boot/`
 After that, navigate to the `Device Configuration` tab in the balenaCloud dashboard, activate the following configuration with the description `Define the file name of the DTB to be used`, and specify the file name of the custom device tree. The value of this configuration should contain the file name only. After the change is applied, the device will automatically reboot and load the new device tree.
 
-After the custom device tree has been validated, it can be included in newer balenaOS images. For Jetson TX2 and Nano, open a pull request in the [balena Jetson device](https://github.com/balena-os/balena-jetson) repository following this [example commit](https://github.com/balena-os/balena-jetson/commit/3dbf9c96e5986c2138f318d1ee9f0d5c1a2fc3c8). For the Jetson AGX Orin, the PR should be opened in the [balena Jetson Orin](https://github.com/balena-os/balena-jetson-orin) repository. Once your PR is approved and merged, a new balenaOS image that includes your custom device tree will become available shortly.
+After the custom device tree has been validated, it can be included in newer balenaOS images. For Jetson TX2 and Nano, open a pull request in the [balena Jetson device](https://github.com/balena-os/balena-jetson) repository following this [example commit](https://github.com/balena-os/balena-jetson/commit/3dbf9c96e5986c2138f318d1ee9f0d5c1a2fc3c8). For Jetson Orin devices, the PR should be opened in the [balena Jetson Orin](https://github.com/balena-os/balena-jetson-orin) repository. Once your PR is approved and merged, a new balenaOS image that includes your custom device tree will become available shortly.
 
 Please note that if the changes for your carrier board expand past kernel device-trees, or require modifications to board configuration files like pin multiplexing configuration files or any other device-trees or files used by firmware, these may not be provided by the existing cloud images. During provisioning the resulting configuration changes are stored in the QSPI or in the hardware defined boot partitions, and thus will be replaced with the default values when updating the Host Operating System. Please [contact us](https://www.balena.io/contact-sales) if you would like to use a Jetson carrier board which may not be fully compatible with its' corresponding devkit, or with any of our cloud images for your Jetson module.